Loading ...
Loading ...
Loading ...
87
Maintenance
Removing & Installing Body Components
Seat
The seat must be removed to access the color
label, accessory socket (Canada model only)
and coolant reserve tank cap, to use the
helmet holder, to store a U-shaped lock, and
to remove the left side cover.
❙
Removal
1.
Insert the ignition key into the lock.
2.
Turn the ignition key clockwise and hold
it, then pull rear of the seat back and up.
❙
Installation
1.
Insert the front and rear prongs into the
front and rear stays on the frame.
2.
Push forward and down on the rear of the
seat until it locks in place.
Make sure that the seat is locked securely
in position to pull it up lightly.
The seat locks automatically when installed.
Take care not to lock your key in the under
seat compartment.
Do not store gloves, towel or other items
around the fuel pump. They may cause
damage to the fuel pump.
Front stay
Rear stays
Prongs
Seat
Ignition key
Lock
Fuel
pump
14 CTX1300 A-31MJN6000.book 87 ページ ２０１３年１２月１８日 水曜日 午前９時３７分
Loading ...
Loading ...
Loading ...