Loading ...
Loading ...
Loading ...
Engine Oil u Changing Engine Oil & Filter
102
Maintenance
6.
Remove the oil filter with a filter wrench
and let the remaining oil drain out. Make
sure the prior seal is not stuck to the
engine.
u Discard the oil and oil filter at an
approved recycling center.
7.
Apply a thin coat of engine oil to the
rubber seal of a new oil filter.
8.
Install a new oil filter and tighten.
9.
Install a new sealing washer onto the
drain bolt. Tighten the drain bolt.
10.
Fill the crankcase with the recommended
oil (2 P. 80) and install the oil fill cap.
11.
Check the oil level. 2 P. 99
12.
Check that there are no oil leaks.
Filter
Rubber
seal
Filter
Torque: 19 lbf·ft (26 N·m, 2.7 kgf·m).
Torque: 21 lbf·ft (29 N·m, 3.0 kgf·m).
Required oil
When changing oil &
engine oil filter:
4.1 US qt (3.9 liters)
When changing oil only:
3.8 US qt (3.6 liters)
14 CTX1300 A-31MJN6000.book 102 ページ ２０１３年１２月１８日 水曜日 午前９時３７分
Loading ...
Loading ...
Loading ...