Loading ...
Loading ...
Loading ...
74
Maintenance
Maintenance Fundamentals
To ensure safety, it is your responsibility to
perform a pre-ride inspection and make sure
that any problem you find is corrected. A pre-
ride inspection is a must, not only for safety, but
because having a breakdown, or even a flat tire,
can be a major inconvenience.
Check the following items before you get on
your motorcycle:
● Tire tread wear and air pressures are within
limits.
2 P. 82
● Lights, horn, and turn signals operate
normally.
Check the following items if you are carrying a
passenger or cargo:
● Combined weight is within load limits.
2 P. 170
● Cargo is secured properly.
● Suspension spring preload is adjusted to suit
load.
2 P. 114
Check the following items after you get on your
motorcycle:
● Throttle action moves smoothly without
binding.
2 P. 112
● Brake lever and pedal operate normally.
● Check the remaining fuel and refuel as
needed.
2 P. 13, 61
● Engine stop switch functions properly.
2 P. 37
Check the following items at regular intervals:
● Oil level is between the upper and lower
marks.
2 P. 99
● Brake fluid level is
Front: above the LOWER level mark.
2 P. 105
Rear: between the UPPER and LOWER level
marks.
2 P. 105
● Engine coolant level is between the UPPER
and LOWER level marks.
2 P. 103
● Clutch fluid level is above the LOWER level
mark.
2 P. 108
● Side stand function properly. 2 P. 109
Pre-ride Inspection
14 CTX1300 A-31MJN6000.book 74 ページ ２０１３年１２月１８日 水曜日 午前９時３７分
Loading ...
Loading ...
Loading ...