Loading ...
Loading ...
Loading ...
Cleaning and care
72
Finalising pyrolytic cleaning
When the time remaining has counted
down to 0:00h, a message will appear
in the display to tell you that the door is
unlocking.
Process finished will appear in the display
and a buzzer will sound as soon as the
door has been unlocked.
Switch the oven off.
The visual and acoustic signals will
switch off.
Risk of injury caused by hot
surfaces.
At the end of the Pyrolytic cleaning
programme, the oven will still be very
hot. You could burn yourself on the
heating elements and the oven
interior.
Allow the heating elements and the
oven compartment temperature to
drop to a safe level before removing
any residues.
Clean the oven compartment to
remove any pyrolytic residues (e.g.
ash) that may have built up
depending on the degree of soiling in
the oven.
Most residues can be removed with
warm water, a little washing-up liquid
and a clean sponge or a clean, damp
microfibre cloth.
Depending on the level of soiling, a
visible deposit can build up on the
glass on the inside of the oven door.
This can be removed with a
dishwashing sponge, a glass scraper
or a stainless steel spiral pad and a
little washing-up liquid.
The fibreglass seal around the front
of the oven should be handled
carefully. Do not rub and scour it.
Ideally, you should avoid cleaning it.
Enamelled surfaces can be
permanently discoloured by spilled
fruit juice. Such discolouration does
not affect the properties of the
enamel.
Do not attempt to remove these
marks.
Loading ...
Loading ...
Loading ...