Loading ...
Loading ...
Loading ...
MAINTENANCE AND SERVICE
}}
615
3. Undo the black bulb holder by turning it
anticlockwise and pulling it out.
4. Remove the bulb by pressing it in and
turning anticlockwise.
5. Fit a new bulb by pressing it in and turning
it clockwise.
6. Attach the bulb holder by turning it clock-
wise.
7. Move back the insulation and then hook in
the panel and press it back into place.
IMPORTANT
Never touch the glass part of the bulbs
with your fingers. Grease from your fingers
is vaporised by the heat, coating the reflec-
tor and then causing damage.
Related information
•
Exterior lamp positions (p. 612)
•
Bulb specifications (p. 616)
Replacing the rear fog lamp bulb
The rear foglight is fitted in the rear bumper
on the driver's side.
The rear fog light is only fitted on the driver's side.
1. Loosen the foglight unit on the driver's
side by inserting a flat object, such as a
table knife or a screwdriver, on the bulb
kit's narrower short side of the keypad and
then prize the foglight unit out.
2. Unplug the connector.
3. Undo the bulb holder by turning it anti-
clockwise and pulling it out.
4. Remove the bulb by pressing it in and
turning anticlockwise.
5. Fit a new bulb by pressing it in and turning
it clockwise.
6. Attach the bulb holder by turning it clock-
wise.
Loading ...
Loading ...
Loading ...