Loading ...
Loading ...
Loading ...
||
CLIMATE
210
3.
Press
Add timer.
> A pop-up window is shown.
NOTE
It is not possible to add a time setting if
there already are 8 settings entered for the
timer. Delete a time setting in order to be
able to add a new one.
4.
Tap on
Date to set the time for a single
date.
Tap on
Days to set the time for one or
more days of the week.
With
Days: Activate/deactivate repetition
by ticking/unticking the box for Repeat
weekly.
5.
With
Date: Select the date for precondi-
tioning by scrolling the date list with the
arrows.
With
Days: Select the days of the week
for preconditioning by tapping on the but-
tons for the days of the week.
6. Set the time when the preconditioning
should be finished by scrolling with the
arrows.
7.
Tap on
Confirm in order to add the time
setting.
> The time setting is added to the list and
is activated.
WARNING
Do not use preconditioning
9
:
•
In unventilated spaces indoors.
Exhaust gases are emitted if the heater
starts.
•
In locations with combustible or flam-
mable material nearby. Fuel, gas, long
grass, sawdust, etc. may ignite.
•
When there is a risk that the heater’s
exhaust line may be blocked. For
example, deep snow under the front
part of the car can obstruct the heat-
er’s ventilation.
Remember that the preconditioning can be
started by a timer that has been set for a
long time in advance.
Editing a time setting
1. Open the climate view in the centre dis-
play.
2.
Select the
Parking climate tab.
3. Press the time setting that is to be
changed.
> A pop-up window is shown.
4. Edit the time setting in the same way as
described in "Adding a time setting"
above.
Related information
•
Preconditioning (p. 207)
•
Preconditioning time setting (p. 209)
•
Activating and deactivating time setting
for preconditioning (p. 211)
•
Removing time setting for preconditioning
(p. 211)
9
Applicable to fuel-driven auxiliary heater.
Loading ...
Loading ...
Loading ...