Loading ...
Loading ...
Loading ...
Your device has been tested in a controlled
environment and shown to be water and dust
resistant in certain circumstances (meets
requirements of classification IP68 as described by
the international standard IEC 60529 – Degrees of
Protection provided by Enclosures [IP Code]; test
conditions: 15-35°C, 86-106 kPa, 5.0 feet, for 30
minutes). Despite this classification, your device is
not impervious to water damage in any situation. It
is important that all compartments are closed
tightly.
Note: If any liquid is found to have entered your
device components or an internally sealed system,
this condition will void your device warranty.
Follow these tips carefully to prevent damage to the
device.
l Any device which uses accessible compartments
or ports that can be opened, should have these
sealed or closed tightly to prevent liquid from
entering the system.
l Whenever your device gets wet, dry it thoroughly
with a clean, soft cloth. If your device has gotten
wet, you should dry the inside of the charging port
before inserting a power connector to charge your
device. If the charging port is not fully dry, your
device may operate abnormally. For example, it
may charge more slowly or overheat.
l Do not expose the device to salt water or ionized
water, or to water over 5.0 feet deep for more
than 30 minutes. If your device is exposed to fresh
water, dry it thoroughly with a clean, soft cloth. If
the device is exposed to any liquid other than
fresh water, rinse the device with fresh water
Legal 192
Loading ...
Loading ...
Loading ...