Loading ...
Loading ...
Loading ...
17
USE AND CARE INFORMATION
EN
3
33
USE
Control panel
Butto
n
Functio
n
o t t u b DEL
n
A
The button only works when the downdraft is open.
Press Briefly = Turns the Lights On/Off at maximum intensity.
Press and hold for 2 Seconds = Turns the Dimmer Lights
On/Off.
B Only works with the downdraft Open.
Press briefly = Activates/Deactivates Delay mode, causing auto-
matic shutdown of the Motor and the Lighting system from any
speed with a 15’ delay. It is disabled by pressing the same button
again, turning the motor off or closing the downdraft.
LED Button B+ Button for the set Speed are lit.
Works both with the downdraft Up and Down.
Press and hold for 2 Seconds = With the filter alarm triggered the
Filter Alarm is Reset. These indications are only visible when the
motor is turned off.
LED button ON:
Indicates the need to wash the metal grease filters.
The alarm is triggered after the Hood has been in
operation for 100 working hours.
Flashing LED button:
Indicates the need to change the activated charcoal
filters, and also to wash the metal grease filters. The
alarm is triggered after
the Hood has been in
operation for 200 working hours.
Works both with downdraft Up and Down with Motor + Lights =
Off.
Press and hold for 4 Seconds = Enables/disables the Keyboard
lock.
All the LED buttons flash twice. During the Lock
the LED buttons light up in sequence.
C Only works with the downdraft Up.
Press briefly = Activates speed four.
LED button ON.
Only works with the downdraft Up.
Press and hold for 2 seconds = Enables/Disables the
Intensive
speed. This speed is timed to run for 6 minutes. At the end of this
time the system will return to the speed set previously.
It is disabled by pressing the same button again, turning the motor
off or closing the downdraft.
Flashing LED button.
D Only works with the downdraft Up.
Activates speed three.
LED button ON.
E Only works with the downdraft Up
Activates/Deactivates speed two.
LED button ON.
F Only works with the downdraft Up.
Press briefly = Activates/Deactivates speed one.
LED button NO.
downdraft Up and Down
Press and hold for 2 Seconds = Enables/Disables the Activated
Charcoal Filter Alarm with the Motor turned off and no Filter
Alarm triggered.
LED button B flashes twice = Activated Charcoal
filter Alarm Activated.
LED button B flashes once = Activated Charcoal
filter Alarm Deactivate
d
.
G
downdraft Up
Press briefly = Turns the Motor off.
LED b
u
tton goes out.
downdraft Up and Down
Press and hold for 2 Seconds with Motor and Lights Off =
Enables/Disables the Remote control.
LED button
G
+ F flashes twice = Remote control
Enabled.
LED button G + F flashes once = Remote control
Disabled.
H downdraft Up = Lower the downdraft + Lights and Motor Off
downdraft Down = Upper the downdraft + Lights and Motor On.
Warning: If the downdraft remains partially open for any reason,
press the Button to complete the opening or closing cycle.
EN
3
33
USE
Control panel
Butto
n
Functio
n
o t t u b DEL
n
A
The button only works when the downdraft is open.
Press Briefly = Turns the Lights On/Off at maximum intensity.
Press and hold for 2 Seconds = Turns the Dimmer Lights
On/Off.
B Only works with the downdraft Open.
Press briefly = Activates/Deactivates Delay mode, causing auto-
matic shutdown of the Motor and the Lighting system from any
speed with a 15’ delay. It is disabled by pressing the same button
again, turning the motor off or closing the downdraft.
LED Button B+ Button for the set Speed are lit.
Works both with the downdraft Up and Down.
Press and hold for 2 Seconds = With the filter alarm triggered the
Filter Alarm is Reset. These indications are only visible when the
motor is turned off.
LED button ON:
Indicates the need to wash the metal grease filters.
The alarm is triggered after the Hood has been in
operation for 100 working hours.
Flashing LED button:
Indicates the need to change the activated charcoal
filters, and also to wash the metal grease filters. The
alarm is triggered after
the Hood has been in
operation for 200 working hours.
Works both with downdraft Up and Down with Motor + Lights =
Off.
Press and hold for 4 Seconds = Enables/disables the Keyboard
lock.
All the LED buttons flash twice. During the Lock
the LED buttons light up in sequence.
C Only works with the downdraft Up.
Press briefly = Activates speed four.
LED button ON.
Only works with the downdraft Up.
Press and hold for 2 seconds = Enables/Disables the Intensive
speed. This speed is timed to run for 6 minutes. At the end of this
time the system will return to the speed set previously.
It is disabled by pressing the same button again, turning the motor
off or closing the downdraft.
Flashing LED button.
D Only works with the downdraft Up.
Activates speed three.
LED button ON.
E Only works with the downdraft Up
Activates/Deactivates speed two.
LED button ON.
F Only works with the downdraft Up.
Press briefly = Activates/Deactivates speed one.
LED button NO.
downdraft Up and Down
Press and hold for 2 Seconds = Enables/Disables the Activated
Charcoal Filter Alarm with the Motor turned off and no Filter
Alarm triggered.
LED button B flashes twice = Activated Charcoal
filter Alarm Activated.
LED button B flashes once = Activated Charcoal
filter Alarm Deactivate
d
.
G
downdraft Up
Press briefly = Turns the Motor off.
LED b
u
tton goes out.
downdraft Up and Down
Press and hold for 2 Seconds with Motor and Lights Off =
Enables/Disables the Remote control.
LED button
G
+ F flashes twice = Remote control
Enabled.
LED button G + F flashes once = Remote control
Disabled.
H downdraft Up = Lower the downdraft + Lights and Motor Off
downdraft Down = Upper the downdraft + Lights and Motor On.
Warning: If the downdraft remains partially open for any reason,
press the Button to complete the opening or closing cycle.
Loading ...
Loading ...
Loading ...