Loading ...
Loading ...
Loading ...
16
EN
3
31
Warning..:
Handle
with care
Fitting the Front element
• Lift the mobile hood canopy
(see paragraph on Use) by just a
few centimeters.
• To stop movement, simply
press down on the mobile
canopy as it lifts up.
Warning: Never block the
sliding door when it is opening
or closing, except during the
operations required to fit the
frame.
• Remove the sponge guards
from the corners of the glass.
• Take the front Frame and insert
it from above, making sure that
its tabs insert into the slots
provided on the Hood and
sliding it to the left.
Warning..: All the tabs must
be inserted.
• Use a tool (hammer) to tap all
along the front Frame from
right to left until it is
completely flush.
A piece of wood or similar
element can be inserted
between the hammer and the
front Frame to prevent any
damage.
• Please refer to the paragraph on
Use for indications of how to
return the mobile canopy to the
Standard position.
9
Installation of Top Frame
• Raise the downdraft to the Upper Position by a 1-2"
(See Page 15 for Use of Controls).
• Remove the sponge guards from the corners of the
glass.
• Take the Top Frame and insert it from above, making
sure that its tabs insert into the slots provided on the
downdraft and sliding it to the left.
Warning..: All the tabs must be inserted.
• Use a soft rubber mallet or similar tool to tap all
along the Top Frame from right to left until it is
completely ush.
A piece of wood or rubber block can be inserted
between the hammer and the front Frame to prevent
any damage.
• Please refer to the paragraph on Use for indications
of how to return the downdraft to the Standard
position.
10
Front Cover Panel
EN
3
32
Surround Suction Panel
• Open the Hood Door (see
USE).
• Remove the 2 strips of adhesive
tape fastening the panel during
transport.
• Raise the telescopic part to the Upper Position
(See Page 15 for Use of Controls).
• Remove the 2 strips of adhesive tape
fastening the panel during transport.
Loading ...
Loading ...
Loading ...