Ferrari 2011 599 GTB FIORANO

User Manual - Page 38

For 2011 599 GTB FIORANO.

PDF File Manual, 200 pages, Read Online | Download pdf file

2011 599 GTB FIORANO photo
Loading ...
Loading ...
Loading ...
38
For installation and use of a child restraint
system, always follow the instructions that
the manufacturer of the devices is
required to supply.
Always follow the instructions supplied
with the child restraint system precisely.
Keep the instructions in the vehicle
together with the documents and this
manual. Never use second-hand child
seats which are not provided with
instructions for use.
In case of an accident, replace the child seat.
The passenger-side seat belt in this vehicle
is equipped with special retractors to help
properly fasten a child restraint. To install a
child restraint, pull the seat belt out
completely. The retractor will now only
allow the seat belt rewinding and will not
allow the seat belt to be pulled out.
Follow the instructions on the child
restraining system for proper installation in
the vehicle.
Check that the seat belt locking
mechanism has been activated by trying to
pull out a small amount of seat belt with
moderate force. If the system has been
activated, this should not be possible.
To deactivate this feature, release the seat
belt buckle and allow the seat belt to
retract completely.
WARNINGWARNING
Always deactivate this feature prior
to using the seat belt for normal use.
Having the retractor locked can be
dangerous when the seat belt is used
for directly restraining a passenger.
If you must, in an emergency situation,
carry a child in a rearward-facing child
seat in the front passenger seat:
- adjust the seat to the most rearward
position (avoiding contact with the
interior)
- adjust the headrest to the lowest
possible position
- install the child seat when the key is in
the 0 position, following the instructions
provided with the child seat

Installing a child seat with the key in
position II can result in induced
injuries.
- the extra weight applied on the seat
during child seat installation might delay
correct occupant classifi cation if the child
seat is mounted with the key in position II
- always check that no objects are stuck
underneath the seat
- always check that no objects are loose on
the fl oor, either in front, or behind the
seat
- check that no objects contact the seat
Loading ...
Loading ...
Loading ...