Loading ...
Loading ...
Loading ...
123
About your vehicle
2
1
3
8
7
6
5
4
Air conditioning control switch B
Released (LED off)
The air conditioner is on.
The air is cooled and/or only
dehumidified according to the
temperature set.
Pressed (LED on)
The air conditioner is off.
However, heating is still enabled
and will activate according to the
temperature set.
Air distribution controls C and G
They can operate in two modes:
Automatic “AUT”
The air flow distribution is
controlled by the electronic system,
depending on the ambient
conditions and the temperature set.
Manual
This is used to direct the air flow in
the six positions of the respective
areas (driver-passenger).
Temperature setting controls A and I
They are used to set the desired
temperature in the passenger
compartment.
The “LO” and “HI” (minimum and
maximum, respectively) air
temperature settings are activated at
the opposite end positions.
Fan speed control E
It has three operating modes:
Automatic “AUT”
The air flow is controlled by the
electronic system, according to the
selected temperature to be reached
and maintained.
Manual “OFF”
Turn the control to this position to
turn off the air conditioning and to
only allow air inlet from the outside
when the vehicle is moving.
Fan speed
The four setting positions allow the
occupants to select the air flow rate.
Residual heat function J
This function allows the user to
maintain the temperature set for the
passenger compartment for a
specific time (15 minutes), even
after the key has been turned to
0
(for external temperatures lower
than 77°F (25°C)).
To activate this function, press the
“REST” button before turning the
key to
0. The system will use the hot
water recirculation pump and the
first fan speed to maintain the
temperature.
Loading ...
Loading ...
Loading ...