Loading ...
Loading ...
Loading ...
119
About your vehicle
2
1
3
8
7
6
5
4
WARNINGWARNING
Sitting in a reclined position while
the vehicle is in motion could be
dangerous. The backrest should not
be tilted too far back. The 3-point
shoulder/lap belt must be fi rmly
secured against the occupant’s body
in order to function properly.
Therefore, both the driver and
passenger’s backrests must always be
in an upright position while the
vehicle is in motion; otherwise the
3-point shoulder/lap belt would not
remain fi rmly secured against the
occupant’s body.
Serious injury could result.
Driver’s seat position memory (optional)
This device allows you to memorize and
recall three different seat positions.
You can memorize the seat position only
when the ignition is in position II
.
After adjusting the seats by means of
the controls described above, push one of
the three buttons 1, 2 or 3
E, each
corresponding to a memorizable position,
until you hear a double confi rmation tone.
until you hear a double confi rmation tone.
�
The lumbar support adjustment will not be
memorized with the seat position.
The memorization of a new seat position
cancels the one previously stored with the
same button.
To recall one of the memorized positions
when the door is open, press button 1, 2 or
3
E for about 3 seconds.
To recall the memorized position with the
door closed, press the relative button until
you hear the tone indicating that the seat
has stopped.
Backrest tilting
Press button
X to tilt the backrest forward.
X
Press button X before moving the backrest
back to its normal position.
Loading ...
Loading ...
Loading ...