Loading ...
Loading ...
Loading ...
107
About your vehicle
2
1
3
8
7
6
5
4
UP and DOWN levers, the system will
allow you to shift gears using the lever,
but it will then switch back to “Automatic”
mode.
“AUTO easy exit” mode
The vehicle is always started in “AUTO
easy exit” mode, unless it was turned off
with the gearbox in “AUTO” mode.
Activation is signaled by the word
AUTO
▼
appearing on the gear display,
on the instrument panel.
on the instrument panel.
The system will automatically shift the
gears UP and DOWN according to the
vehicle speed, the engine RPM and the
torque/power requested by the driver.
In “AUTO easy exit” mode, if you operate
the control levers UP and DOWN (with
the vehicle in motion) the system will exit
“AUTO” mode to switch to “Manual”
mode.
If you then request “AUTO” mode by
pressing the control button
A
AUTO, the
system will use all the “Automatic” mode
gearshifting features.
Push start (F1 gearbox)
In the event that the ignition system
malfunctions, you can “push start” the
vehicle as follows:
- perform the “system starting” procedure
(see page 100)
- with the gearshift in N, as the vehicle
speed is increasing, request an UP-shift.
This procedure should be avoided
unless there is an emergency situation!
Restarting the engine (F1gearbox)
In the event that the engine is turned off
accidentally, restart it using the ENGINE
START button, after turning the key to
0
and then to II: the engine will start
immediately.
Starting and driving the vehicle
(Mechanical Gearbox)
Starting the engine
Before starting the engine, make sure that
the alarm system and all electrical devices
with high power absorption are turned
off.
- Ensure that the handbrake is engaged.
- Put the gearshift lever into neutral.
- Fully depress the clutch pedal without
pushing the accelerator.
1
R
3
5
2
4
6
Loading ...
Loading ...
Loading ...