Loading ...
Loading ...
Loading ...
13
General
8
7
6
1
5
4
3
2
Operation
Each time the ignition key is removed
from the 0 position, the protection system
activates the engine immobilizer.
- When starting the engine, with the key
in postion II press the ENGINE START
button on the steering wheel:
button on the steering wheel:
1) If the code is recognized, the CODE
warning light A on the instrument
panel turns off within one second,
while the OBD warning light B turns
off after about eighteen seconds, once
the ECU has completed its diagnostic
cycle. In these conditions, the
protection system has recognized the
key code and deactivated the
immobilizer.
�
2) If the CODE warning light A remains
on and the OBD warning light B does
not turn off after the ECU has
completed its diagnostic cycle, it
means that the code has not been
recognized. In this case, it is advisable
to turn the key back to position
0 and
then back to II. If the immobilizer
device remains active, try with the
other key provided.
If you are still unable to start the
engine, use the emergency starting
procedure (see page 15) and contact
your Authorized Ferrari Dealer.
�
- While driving, with the ignition key in
position II:
1) If the CODE warning light A
illuminates, it means that the system is
performing a self-diagnostic cycle. At
the fi rst opportunity, you can stop and
test the system: turn off the engine by
moving the ignition key to position
0,
then move the key back to position II
.
The CODE warning light A will
illuminate and should go off within
one second. If the warning light stays
on, repeat the procedure described
previously leaving the key at
0 for
more than 30 seconds.
Loading ...
Loading ...
Loading ...