Loading ...
Loading ...
Loading ...
RCD-W7V 4-236-407-11(1)
51
US
Recording on CD-R
Finalizing a CD-R or CD-
RW disc
Finalizing completes the recording of a disc.
It enables you to play the disc on other
players. (The player must be CD-RW
compatible.)
When a recording is finished, a CD-R or
CD-RW disc must be finalized. Once that is
done, a CD-R disc may not be changed or
added to.
CD-RW discs are locked once they are
finalized, and must be unfinalized to permit
additional recording or erasure.
When using the remote, set DECK A/B
switch to DECK B for operations on DECK
B.
1 Press FINALIZE.
The “FINALIZE” indicator will begin
to flash, and the PLAY, PAUSE, and
REC indicators light up for about 8
seconds. Erasing enters standby mode.
2 Press
HH
HH
H while the “FINALIZE”
indicator is flashing.
Finalizing starts. During finalizing, “
TOC WRITE” appears in the display
and the remaining time for finalizing
appears in the display. When the
finalizing process is finished, the total
track number and the total playing
time appear in the display and the TOC
(red) indicator lights off.
Notes
• The TOC (red) indicator appears on the front panel
display if the disc you put in DECK B has not been
finalized. Check the indicator each time before
finalizing.
• Once finalizing process starts, you cannot stop in
the middle of the process.
• Do not turn off the recorder or disconnect the
recorder from the AC power source in the middle
of the finalizing process.
FINALIZE
FINALIZE
*RCD-W7V.p65_46-53 12/9/01, 6:10 PM51
Loading ...
Loading ...
Loading ...