Loading ...
Loading ...
Loading ...
RCD-W7V 4-236-407-11(1)
47
US
Recording on CD-R
Recording a CD to CD-R or
CD-RW disc at High Speed
(High Speed Synchro-Recording)
You can easily make digital recordings from
a CD to a CD-R, or CD-RW, faster than
normal Synchro-Recording, making track
numbers in the same sequence as the
original CD.
Before recording, see “Notes” on page 48.
After recording, you must finalize the disc.
Until the disc is properly finalized, it cannot
be played on any other machine. See
“Finalizing CD-R and CD-RW discs” on
page 51.
1 Press POWER.
2 Press
AA
AA
A of DECK B and place a
recordable CD-R or CD-RW on the
disc tray. Press
AA
AA
A of DECK B again
to close the disc tray.
CD SYNCHRO HIGH
CD SYNCHRO
HIGH
3 Press
AA
AA
A of DECK A and place a CD
on the disc tray. Press
AA
AA
A of DECK A
again to close the disc tray.
4 Press CD SYNCHRO HIGH.
“CD SYNCHRO” appears and “REC”
flashes in the front panel display. And
the recorder (DECK B) optimizes itself
for the best possible recording and
“OPC” appears on the display shortly.
DECK A will check that digital
recording is available.
DECK B stands by for recording, and
DECK A stands by for playing.
5 If front panel display is displayed
as above, it will be ready to record.
Press
HH
HH
H on the front panel or on
the remote to start recording.
High-Speed recording starts. You
cannot monitor the recorded signal
during recording. DECK A and DECK
B will automatically stop after
recording.
1 track CD synchro (High speed)
During stop, press AMS (./>) until
you find the track after you press CD
SYNCHRO HIGH.
To stop recording
Press x .
Notes
• When copying a disc digitally recorded under
control of the Serial Copy Management System
(SCMS), the recorder automatically select the
analog recording and the recording speed will
become normal. For detailed explanation on
SCMS, refer to the “Notes” on page 49.
• When copying a commercial music CD contains
copy-prohibit signals, the recorder automatically
select the analog recording, and the recording speed
will become normal.
DECK A
REC
TRACK MIN SEC
CD SYNCHRO
HIGH
“TOC” starts to flash. The recorder starts to
read the TOC (Table of Contents) data and
shows the type of the disc in the deck on the
front panel display.
With the label side up
*RCD-W7V.p65_46-53 12/9/01, 6:10 PM47
Loading ...
Loading ...
Loading ...