User Manual - Page 83

For 2018 JEEP WRANGLER.

Loading ...
Loading ...
Loading ...
Check for an inoperative outside light bulb
if either indicator flashes at a rapid rate.
White Indicator Lights
2H
Two Wheel Drive High Indicator
Light If Equipped With a Premium Cluster
This light alerts the driver that the vehicle is
in the two wheel drive high mode.
Active Speed Limiter Ready
Indicator Light If Equipped With A
Premium Instrument Cluster
This light will illuminate when the Active
Speed Limiter has been turned on, but not
set.
Active Speed Limiter SET Indicator
Light If Equipped With A Base Instrument
Cluster
This light will turn on when the Active Speed
Limiter is on and set to a specific speed.
Hill Descent Control (HDC)
Indicator Light If Equipped
This indicator shows when the Hill Descent
Control (HDC) feature is turned on. The lamp
will be on solid when HDC is armed. HDC can
only be armed when the transfer case is in the
“4WD LOW” position and the vehicle speed
is less then 30 mph (48 km/h). If these
conditions are not met while attempting to
use the HDC feature, the HDC indicator light
will flash on/off.
Speed Warning Indicator Light
If Equipped
When Set Speed Warning is turned on, the
speed warning telltale will illuminate in the
instrument cluster with a number matching
the set speed. When the set speed is ex-
ceeded, the indication will light up yellow
and flash along with a continuous chime (up
to ten seconds or until the speed is no longer
exceeded). Speed Warning can be turned on
and off in the instrument cluster display, for
further information refer to “Instrument Clus-
ter Display Menu Items” in “Getting To Know
Your Instrument Panel.”
The number “55” is only an example of a
speed that can be set.
Cruise Control Ready Indicator
Light If Equipped With A Premium
Instrument Cluster
This light will turn on when the speed control
has been turned on, but not set. Refer to
“Speed Control If Equipped” in “Starting
And Operating” for further information.
Cruise Control SET Indicator Light
If Equipped With Base Instrument Cluster
This indicator light will illuminate when the
speed control is set.
Refer to “Speed Control If Equipped” in
“Starting And Operating” for further informa-
tion.
Blue Indicator Lights
High Beam Indicator Light
This indicator light will illuminate to indicate
that the high beam headlights are on. With
the low beams activated, push the multifunc-
tion lever forward (toward the front of the
vehicle) to turn on the high beams. Pull the
81
Loading ...
Loading ...
Loading ...