User Manual - Page 39

For 2018 JEEP WRANGLER.

Loading ...
Loading ...
Loading ...
EXTERIOR LIGHTS
Headlight Switch
The headlight switch is located on the left
side of the instrument panel. This switch
controls the operation of the headlights,
parking lights, automatic headlights if
equipped, instrument panel lights, instru-
ment panel light dimming, interior lights, and
fog lights if equipped.
Rotate the headlight switch clockwise to the
first detent for parking light and instrument
panel light operation. Rotate the headlight
switch to the second detent for headlight,
parking light, and instrument panel light op-
eration.
Daytime Running Lights If Equipped
The Daytime Running Lights (DRLs) are in a
dedicated position below the headlight as-
sembly. DRLs are active when the Low Beams
are not and when the vehicle is shifted into
any position other than PARK (auto transmis-
sion), or when the vehicle begins to move
(manual transmission).
NOTE:
The Daytime Running Lights, on the same
side of the vehicle as the active turn signal,
will turn off automatically when a turn signal
is in operation and turn on again when the
turn signal is not operating.
High/Low Beam Switch
Push the multifunction lever toward the in-
strument panel to switch the headlights to
high beams. The lever will return to the cen-
tered position. To return the headlights to low
beam, pull the lever toward the steering
wheel, or push the lever toward the instru-
ment panel.
Headlight Switch
Multifunction Lever
37
Loading ...
Loading ...
Loading ...