Loading ...
Loading ...
Loading ...
the inverter should automatically reset. If the
power rating exceeds approximately
170 Watts, the power inverter may have to be
reset manually.
WARNING!
To avoid serious injury or death:
• Do not insert any objects into the
receptacles.
• Do not touch with wet hands.
• Close the lid when not in use.
• If this outlet is mishandled, it may
cause an electric shock and failure.
Auxiliary Switches — If Equipped
Four auxiliary switches located in the lower
switch bank of the instrument panel can be
used to power various electrical devices. You
have the ability to configure the functionality
of the auxiliary switches via the Uconnect
settings. All switches can be configured for
setting the switch type operation to latching
or momentary, power source of either battery
or ignition, and ability to hold last state
across key cycles.
NOTE:
Holding last state conditions are met when
switch type is set to latching and power
source is set to ignition.
For more information, refer to “Uconnect
Settings” in “Multimedia” in your owner’s
manual.
The auxiliary switches manage the relays that
power four blunt cut wires. These wires are
located under the instrument panel in the
passenger compartment and under the hood
to the right, near the battery.
In addition to the four auxiliary switch wires,
a fused battery wire and ignition wire are also
located in the interior, in the passenger side
under the instrument panel.
Auxiliary Switches
Auxiliary Switch Connections –
Under Hood
Auxiliary Switch Connections –
Under Instrument Panel
67
Loading ...
Loading ...
Loading ...