Loading ...
Loading ...
Loading ...
92
ENGLISH
PC Connection Problems
Press and hold the button on the remote control to select the on the top right
of [Home Dashboard]. In the edit mode, set the icon of the HDMI terminal connected to
the PC to [PC] to apply the video and aspect ratio settings that are aligned with the PC.
To connect a different device to the same input terminal, you need to set the icon again
because the settings of the edit icon will not be automatically restored.
If you experience any of the problems below while using the product, please check the
following. There may not be a problem with the product.
The screen remains blank after it is connected to a PC.
• Check that the PC is properly connected to the projector.
• Turn the projector off and back on using the remote control.
• Restart the PC with the projector on.
• Check that the current screen resolution supports the PC input.
• To use dual monitors, check that the PC or notebook supports dual-monitor
mode.
• Reconnect the high speed HDMI® cable.
• If you have connected the RGB output port of your PC to the HDMI input port or
your projector. You need an RGB to HDMI gender.
You will not see anything on the screen if you use an HDMI to RGB gender.
The screen is cut off or moved to one side after it is connected to a PC.
• Set the PC’s resolution to one supported by the projector.
• Set the connected HDMI device’s name to PC.
• Press and hold the button on your remote control. Select the in the
upper right corner and change the icon of the HDMI terminal connected to
[Inputs] to PC.
The sound does not play when the PC is connected with an HDMI® cable.
• Configure projector as your default device in Control Panel Sound in your PC
settings.
• Consult your manufacturer on whether your graphics card supports HDMI audio
output.
Loading ...
Loading ...
Loading ...