Loading ...
Loading ...
Loading ...
English 24
Getting the Most Out of Your Cooktop
Cooktop Cooking Guide
Advantages of induction cooking
When cooking with induction, heat is generated directly in
the base of the pan. This provides many benefits for you:
• Time saving when boiling and frying. Cookware is
heated directly.
• Less energy is consumed.
• Easy cleaning and maintenance. Spilled food does not
burn onto the cooktop so quickly.
• Controlled supply of heat and increased safety. The
burner reacts immediately to any power change, so
heating can be dosed precisely. Heating is interrupted
when you remove the cookware from the element even
if the element is still switched on.
Cookware
Only ferromagnetic cookware made of the following
materials is suitable for induction cooktops:
• Enameled steel
• Cast iron
• Induction-capable cookware of stainless steel.
To determine whether the cookware is suitable, check
whether the base of the pot or pan attracts a magnet.
There are other induction-capable pots and pans whose
bases are not completely ferromagnetic.
Unsuitable cookware
Do not ever use adapter plates for induction or cookware
made of:
• Traditional stainless steel
• Glass
• Clay
• Copper
• Aluminum
Characteristics of the pan base
The characteristics of the pan base can influence the
evenness of the cooking results. Pans made from materials
which help diffuse heat, such as stainless steel sandwich
pans, distribute heat uniformly, saving time and energy.
No pan or improper size
If no pan is placed on the selected element, or if it is made
of unsuitable material or is not the correct size, the power
level displayed on the element indicator will flash. Place a
suitable pan on the element to stop the flashing. If you take
longer than 90 seconds to place a suitable pan on the
element, it will automatically turn off.
Empty pans or pans with a thin base
Do not heat up empty pans, or use pans with a thin base.
The cooktop is equipped with an internal safety system.
However, an empty pan may heat up so quickly that the
"automatic switch off" function may not have time to react
and the pan may reach very high temperatures. The pan
base could melt and damage the cooktop glass. In this
case, do not touch the pan and switch the cooktop off. If the
cooktop fails to work after it has cooled down, please
contact the technical service.
Pan detection
Each element has a minimum limit for detecting pans,
which varies depending on the material of the pan you are
using. You should therefore use the element that best
matches the diameter of your pan.
Characteristics of the pan base
The characteristics of the pan base can influence the
evenness of the cooking results. Pans made from materials
which help diffuse heat, such as stainless steel sandwich
pans, distribute heat uniformly, saving time and energy.
If the base of the cookware is
not completely ferromagnetic,
only the area that is
magnetizable will get hot. Thus
it can happen that the heat is
not distributed evenly.
If the base of the cookware is
made from aluminum, among
other things, the ferromagnetic
area is also reduced. It can be
that this cookware will not
become truly hot or it may not
be detected at all.
To get good cooking results,
we recommend that the
diameter of the ferromagnetic
area of the cookware match
the size of the element. If a pot
or pan is not detected on an
element, try it again on an
element with a smaller
diameter.
Loading ...
Loading ...
Loading ...