Loading ...
Loading ...
Loading ...
English 14
Automatic time limitation
If the element is used for prolonged periods of time without
changes in the settings being made, the automatic time
limitation function is triggered.
The element stops heating.
”‰ and the residual heat
indicator
•/œ flash alternately in the display.
The indicator goes out when any symbol is pressed. The
element can now be reset.
When the automatic time limitation is activated, depends
on the selected heat level (from 1 to 10 hours).
Basic Settings
The appliance has various basic settings. You can adjust
these settings to the way you usually cook.
Changing the basic settings
The cooktop must be turned off.
1. Turn on the cooktop with the main switch.
2. Within the next 10 seconds, touch Panel Lock for
about 4 seconds.
™ and ‚ blink alternatingly in the element display and
‹ lights up on the timer display.
3. Touch Panel Lock repeatedly until the indicator for the
desired function appears in the element display.
4. Use the @ and A keys until the desired setting appears
in the kitchen timer display.
Display
Function
™‚
Automatic child lock/panel lock
‹ Off*
‚ On
™ƒ
Audible signals
‹ Confirmation signal and error signals deac-
tivated
‚ Only error signals activated
ƒ Only confirmation signals activated
„ All signals activated*
™†
Automatic timer
‹ Off*
‚-ŠŠ Automatic shut-off time
™‡
Length of timer end signal
‚ 10 seconds*
ƒ 30 seconds
„ 1 minute
™ˆ
Power Management function
‹ = Off*
‚ = 1.000 W. minimum power
‚.= 1.500 W
ƒ = 2.000 W
etc.
Š or Š. = maximum power of the element
™Š
Selection time for heating element
‹ Unlimited*: You can adjust the settings of
the last heating element used at any time
without having to select it again.
‚ Restricted: You can adjust the settings for
the last heating element used within 10
seconds after selecting it. After that you will
have to reselect the heating element before
setting it.
™‹
Reset to basic settings
‹ Off*
‚ Reset the appliance to basic settings
*factory settings
Display
Function
Loading ...
Loading ...
Loading ...