Loading ...
Loading ...
Loading ...
44
Error codes
Error code Description
Possible cause of the
error
Solution
"Buzzer sounds on
switching on.
No error code
displayed"
The hood command
does not work
LIN cable damaged or badly
connected to the hood
electronic board
check connection/replace
the LIN cable
ER03
Continuous sensor
activation. TC turns o
after 10 sec.
Water or pan on glass, on
sensors or on control.
Clean the surface of
the control. Remove the
objects from the sensors.
ER20
TC internal error - Replace TC.
ER21
Overheating.
The temperature control
has detected a temperature
higher than 85° C.
Leave the hob to cool down
and the error will disappear
when the temperature is
below 75° C.
Check the thermal
insulation.
ER22
Faulty button
assessment. The user
interface switches o
after 3.5 - 7.5 seconds.
- Replace TC
ER31
There is an
inconsistency in the
conguration of TC and
induction.
The generator conguration
data do not coincide with
those of the TC.
New conguration.
Replace TC.
Change the generator.
ER36
TC internal error - Replace TC.
ER47
Communication error
between TC and
induction
LIN cable damaged.
There is no power supply in
the LIN cable.
Replace the Cable.
Check that the Cable has
been inserted properly.
E2
Cooking area sensor
overheats. TC turns o
after 10 sec.
Pan empty Do not heat empty pans.
E3
Wrong pan.
The cooking areas are
O.
The pans are losing their
magnetic characteristics
Use appropriate pans
Internal error in generator
circuits
Replace the module
E4
Conguration error. The
cooking area cannot be
activated.
The induction module is not
congured yet.
Perform manual
conguration.
E5
No communication
between UI and
induction generator.
The cooking area cannot
be activated
LIN cable or power cable
faulty.
Check the cables and the
power supply voltage.
Plate cables wrongly
connected.
Check the cables and the
power supply voltage.
Internal error in generator or
lter circuits.
Replace the module.
Loading ...
Loading ...
Loading ...