Loading ...
Loading ...
Loading ...
39
When rst connecting to the domestic power supply, the installer must set the power of
the hob cooking areas based on the actual abilities and capacity of the power supply
itself.
If this is not necessary, the hob can be turned on directly using
, otherwise, follow the
operations below to access the menu.
When the power is rst turned on, the symbol ashes.
Continuing to hold , press the 4 Digits for the cooking areas ( ) one at a time in an
anticlockwise direction, starting from the one on the right.
A beep sounds each time you press, and when button is released it shows:
The Digit for the left rear cooking area will alternately show and .
The Digit for the left front cooking area will show .
Press the Digit for the left rear cooking area and number 8 on the power bar to access the
settings menu. The operation is conrmed by the fact that the display changes from (
and ) to ( and ).
We are now in the hob power settings menu.
Press the Digit for the left front cooking area and select one of the values displayed in the
power bar (0-1-2-3) following the table provided below.
Once the correct value has been entered, conrm by pressing and holding
until
conrmation is received.
7.6 Installer Menu (Hob power settings)
Kw
0 7.4 Kw
1 4.5 Kw
2 3.5 Kw
3 2.8 Kw
Loading ...
Loading ...
Loading ...