Loading ...
Loading ...
Loading ...
37
Timer symbol
After selecting the suction hood Digit, press the Timer Management Digit to set
the countdown.
Grease lter maintenance symbol
The grease lter cleaning signal is displayed by LED and it is always
enabled.
Charcoal lter maintenance symbol
The hood is set by default to ducting mode. With no loads on, press the
Hood controls digit to enable the suction hood. Press and hold the Digit
again for 5 seconds to:
Activate the charcoal lter:
The charcoal (odour) lter symbol lights up for 1 second.
Deactivate the charcoal lter:
The charcoal (odour) lter symbol ashes twice.
After activation, the icon will light up to indicate that maintenance must be
carried out on the charcoal (odour) lter .
Reset and reactivation of the charcoal lter
After having carried out maintenance on the lter:
• press and hold for 5 seconds. - The grease lter LED will go out and
the countdown will be started again.
• press and hold for 5 seconds. - The odour lter LED will go out and
the countdown will be started again.
“9”
Press “ 9 “ on the power bar to set INTENSIVE 1 speed. This setting is
timed to operate for 10 minutes. Once this time has passed, the system
will automatically return to the speed set previously. It is deactivated by
selecting a dierent speed.
Press “ 9 “ on the power bar twice to set INTENSIVE 2 speed. This setting
is timed to operate for 5 minutes. Once this time has passed, the system
will automatically return to the speed set previously. It is deactivated by
selecting a dierent speed.
Delay
This function is only available if Automatic mode is deactivated. Automatic
mode is deactivated by pressing .
Press the suction hood Digit and set a speed on the power bar.
Press the Timer management Digit, which was displaying “CL” but will
change to the countdown. This is pre-set to 15 minutes.
7.4 Suction hood controls
Loading ...
Loading ...
Loading ...