Loading ...
Loading ...
Loading ...
OPERATING O
THER DEVICES
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
E
E
NGLISH
NGLISH
○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○○
<ARE1349> En
41
OPERATING OTHER DEVICES
To learn remote control signals
To operate other manufacturers' remote control signals
that cannot be preset using the remote control unit, have
the remote control unit learn these signals.
Example) To learn the operation to turn the VCR power
on.
1 Set the mode switch to TV/VCR (first position)
when a video cassette recorder is connected.
2
Simultaneously press LEARN and number button 2.
The LED indicator begins blinking.
3 Press SOURCE POWER to establish the target
operation.
The LED indicator remains lit.
Buttons which can be learned are as follows.
VCR SOURCE POWER, CH (+), CH (–), 8, 1, 7, 3, ¡,
¶ (VCR REC)
CABLE SOURCE POWER, CH (+), CH (–), CH RETURN,
CH ENTER, 1 to 9, 0
SAT SOURCE POWER, 2, 3, 5, ∞, SET/SELECT, CH (+),
CH (–), (SAT) INFO
SAT MENU, SAT GUIDE, CH ENTER, 1 to 9, 0
DTV SOURCE POWER, CH (+), CH (–), CH RETURN,
CH ENTER, 1 to 9, 0, •(dot), GREEN, RED, YELLOW,
2, 3, 5, ∞, SET/SELECT, DVT MENU, DTV GUIDE,
DTV INFO, DTV AUDIO, CC, CLEAR, VIEW MODE
DVD SOURCE POWER, ¢, 4, 8, 1, 7, 3, ¡, 2,
3, 5, ∞, SET/SELECT, DVD MENU, DVD TOP
MENU
LD SOURCE POWER, ¢, 4, 8, 1, 7, 3, ¡
÷ CABLE/SAT and DVD/LD cannot be selected at the same time.
÷ (SAT) INFO has no remote control signals preset.
4 Point the transmitters of both remote control
units toward each other with about 0.8 to 2.0 inch
(2 to 5 cm) between them, and press the POWER
button of the other manufacturer's remote control
unit.
The LED indicator blinks.
÷ If the LED indicator blinks once, return to step 3 to
learn functions for other buttons.
÷ If the LED indicator flashes four times, it indicates
an error has occurred. Return to step 3 to redo the
learning.
÷ If the LED indicator flashes four times even after
having redone the learning, it means that the
learning capacity has reached its maximum.
5 When LEARN is pressed, the LEARN mode is
exited, and the remote control unit returns to
normal operation.
Notes
÷ To exit the LEARN mode during a learning operation, press
LEARN again.
÷ If the mode switch position is changed while in LEARN mode,
the LEARN mode is canceled.
÷ After steps 2 and 3, if you do not press a button for one
minute (no operation), the LEARN mode is canceled.
÷ There are some remote control signals which cannot be
learned.
To reset the LEARN setting
Have the LED blinking as in step 2 and then press and
hold the remote control unit’s STANDBY/ON button
pressed for at least 2 seconds.
Note
It is necessary to reset the learn setting when you program the
remote control signal presets.
0.8 to 2.0 inch (2 to 5 cm)
Î
CU-PDP008
PLASMA DISPLAY REMOTE CONTROL UNIT
AUDIO/VIDEO PRE-PROGRAMMED
REMOTE CONTROL UNIT
Î
DVD
/LD
TV
/VCR
CBL
/SAT
DTV
STANDBY/ON
SCREEN
INPUT
CH
CH
EDIT/
DVD
TOP MENU
SOURCE SAT/DTV
(SAT) /DTV
VIEW
RECEIVER
RECEIVER
TV/SAT/DTV/DVD
VCR REC
SET/
SELECT
FAVORITES
¶
Î
VOL
1234
MODE
POWER
INPUT
DISPLAY
AUTO STILL
DTV
AUDIO CC
CLEAR
MODE
1 2 3
4 5 6
7 8 9
¶
0
CH
ENTER
RETURN
MUTING
LEARN
MENU
POWER
MENU
GUIDE
INFO
%
%
%
%
1 7 3 ¡
84
¢
CU-PDP008
PLASMA DISPLAY REMOTE CONTROL UNIT
1
2
2,5
3
LED indicator
Loading ...
Loading ...
Loading ...