Safe On All Smooth Surfaces
Stained Wood
Metal
Tub Surface Tile
Polished Stone
Sealed Concrete
Not Recommended For
Plywood
Uneven Surface
Interlocking
Textured Surface
Installation Tips
Clean the surface thoroughly with any
household cleaner. Then rinse the
surface and allow it to dry completely.
If the strip is too large for the surface,
measure and cut to desired length. Next,
round the corners of the tape using
scissors.
Do not wet the area for 24 hours to
allow for proper adhesion. If you are
installing the tape outdoors, check the
weather to ensure the surface will not
get wet.
Peel off about 6 to 8 inches of the paper
on the back of the non-slip tape, then
place the tape on the surface. Next, roll
the tape on to the surface using the
included roller as you peel off the paper
all the way. To achieve the strongest
bond, start rolling from the centre of the
tape as tape as you make your way to the edges.
For outdoor applications, please install
when the temperature is above 50˚ F (10˚
C). The tape may withstand a temperature
of -13˚ F(-25˚ C).