Loading ...
Loading ...
Loading ...
89
“Memory Stick” operations
Using a “Memory Stick”
Formatting (initializing) a “Memory Stick”
Your camcorder can format (initialize) a “Memory Stick”. If you format a “Memory
Stick”, all data stored in the “Memory Stick” will be deleted. This function is convenient
when you want to delete all data including protected images.
New “Memory Stick”s are already formatted so that formatting is not required for
them.
Sample images are stored in the supplied “Memory Stick”. Note that these sample
images will be deleted if you format the “Memory Stick”.
(1) Insert a “Memory Stick” into your camcorder.
(2) Set the POWER switch to MEMORY while pressing the small green button.
Make sure that the LOCK is set to the right (unlock) position.
(3) Press FN to display PAGE1 (p. 86).
(4) Press MENU, then select FORMAT in
in the menu settings.
(5) Press r/R to select FORMAT on the right and then press EXEC. The display
shows “OK.”
(6) Press EXEC. again. The display shows “FORMATTING”, and formatting
procedure begins. When formatting is finished, the display shows
“COMPLETE.”
To return to FN
Press EXIT.
Check the contents of the “Memory Stick” before formatting
Note that all data in the “Memory Stick” including protected images will be deleted.
While “FORMATTING” is displayed
Do not turn the POWER switch nor press any button.
If “ ” is displayed during /after formatting
Format the “Memory Stick” again.
Note
You cannot format the “Memory Stick” if the write-protect tab on the “Memory Stick” is
set to LOCK.
Loading ...
Loading ...
Loading ...