Loading ...
Loading ...
Loading ...
21
STEP 12 INSTALL LOW CABLE
L1
L2
LOW CABLE (87)
Steel Ball EndBall End
160
169
182
182
L4
L3
L3
101
170
134
25
C5
1
L4
L1
101
144
147
5
101
5
L2
147
144
1. Route the LOW CABLE (87) under Pulley L1 mounted in the front of the FOOT PLATE
CONNECTOR (5) using one 3/8" X 45L FLAT PIN BOLT (144) and one M6 X 12L
MALE SCREW (147), then go around Pulley L2, using one 3/8" X 45L FLAT PIN BOLT
(144) and one M6 X 12L MALE SCREW (147). The cable should run underneath the
FOOT PLATE CONNECTOR (5), not inside the tube.
2. Continue routing cable up and over Pulley L3 mounted at bottom of DOUBLE PULLEY
BLOCK (25), using one 3/8" X 1-3/4" HEX BOLT (134) and one 3/8" NYLA-NUT (170),
then down to clip steel ball end to the bracket welded at MAIN FRAME (1).
If you have purchased the OPTIONAL LEG PRESS, DO NOT INSTALL the
LOW ROW CABLE (87). Follow the instructions in the LEG PRESS box.
Loading ...
Loading ...
Loading ...