Loading ...
Loading ...
Loading ...
9
STEP 2 TOP FRAME AND WEIGHT STACK ASSEMBLY
156
173
161
161
110
161
169
169
109
75
59
57
6
3
2
1
110
180
58
93
93
4
130
180
180
163
163
161
130
1. Attach the two GUIDE RODS (6) to
the stack mount welded to the REAR
STABILIZER (2) using two 3/8" X
3/4" HEX THREADED BOLTS (180).
Tighten these bolts.
2. Slide one RUBBER CUSHION (110)
onto each GUIDE ROD (6) and push
to the bottom. Apply silicone lubricant
to the GUIDE RODS (6), then
CAREFULLY slide a total of 19
WEIGHT PLATES (59) one at a
time onto the GUIDE RODS (6)
making sure to orient the selector
holes toward the side and bottom.
3. Attach TOP PLATE (58) to the
SELECTOR ROD (57) using the
TOP PLATE BOLT (156). Tighten.
Slide the TOP PLATE Assembly
onto the GUIDE RODS (6), running
the SELECTOR ROD (57) down
into the center holes of the
WEIGHT PLATES (59).
4. Insert two 1" GUIDE ROD
HOLDERS (109) into the holes
in the TOP FRAME (4) with a rubber
mallet. Install the TOP FRAME (4)
onto the FRONT UPRIGHT (3) and
GUIDE RODS (6) making sure to
align the GUIDE RODS (6) into the 1"
GUIDE RODS HOLDERS (109).
5. Secure the TOP FRAME (4) to the
FRONT UPRIGHT (3) using two 1/2"
X 3-1/4" HEX BOLTS (130), four 1/2"
SMALLER WASHERS (161), and
two 1/2" NYLA-NUTS (169). Secure
the TOP FRAME (4) to the GUIDE
RODS (6) using two 3/8" X 3/4" HEX
THREADED BOLTS (180) and
two 3/8" LARGER WASHERS (163).
STACK MOUNT
Loading ...
Loading ...
Loading ...