Subaru 2019 Outback 3.6R Touring

User Manual - Page 346

For 2019 OUTBACK 3.6R TOURING.

PDF File Manual, 512 pages, Read Online | Download pdf file

2019 OUTBACK 3.6R TOURING photo
Loading ...
Loading ...
Loading ...
(354,1)
北米Model "A2550BE-B" EDITED: 2019/ 1/ 16
NOTE
. When the settings cannot be chan-
ged, the ON/OFF setting key will be
grayed out.
. The settings cannot be changed for
approximately 14 seconds after turning
the ignition switch to the “ON” position.
. The ON/OFF setting key may be
greyed out if the Reverse Automatic
Braking system malfunctions, etc. In
this case, turn the ignition switch to the
“LOCK”/“OFF” position and then turn it
to the “ON” position again. If the setting
cannot be changed even after turning
the ignition switch to the “ON” position
again, consult your SUBARU dealer.
. The settings will be restored as
follows when the select lever is shifted
to the “R” position next time.
Reverse Automatic Braking sys-
tem settings: default (ON setting)
Object detection warning beep-
ing sound: the setting selected by
operating the audio/navigation
monitor
Also, the following settings can be chan-
ged by operating the combination meter
display.
. Warning volume
. Sonar audible alarm
For details, refer to “RAB” F3-46.
& Handling of the sonar sen-
sors
S07BN06
The 4 sonar sensors are located in the rear
bumper. To ensure the proper operation of
the Reverse Automatic Braking system,
observe the following precautions.
. Do not affix any stickers or other items
on the sonar sensor or the bumper surface
near the sonar sensors.
. Always keep the sonar sensor and the
rear bumper surface near the sonar
sensors clean.
. Do not modify the rear bumper.
. Do not paint the bumper near the sonar
sensors.
. Do not apply strong impacts to the rear
bumper near the sonar sensors. If a sensor
becomes misaligned, a system malfunc-
tion may occur, including inability to detect
objects in the reversing direction. If any
strong impact is applied to the rear
bumper, contact a SUBARU dealer to
have the system inspected.
. Do not disassemble the sonar sensors.
NOTE
If the sonar sensors require repair or
replacement, or if the area of the rear
bumper near the sonar sensors re-
quires repair, paintwork or replace-
ment, contact your SUBARU dealer for
assistance.
Starting and operating/Reverse Automatic Braking System
7-68
Loading ...
Loading ...
Loading ...