Loading ...
Loading ...
Loading ...
(122,1)
北米Model "A2550BE-B" EDITED: 2019/ 1/ 16
For details about turning off the push-
button ignition switch, refer to “Switching
power status” F3-7.
. If the door handle is gripped with a
gloved hand, the door lock may not be
released.
. If the door lock sensor is touched three
times or more repeatedly, the system will
ignore the sensor operation.
. When performing the locking proce-
dure too quickly, locking may not have
been completed. After locking the doors, it
is recommended to pull the REAR door
handles to confirm that the doors have
been locked.
. It is possible to lock the doors even
when one of the doors is open. After
performing the locking procedure, close
the opened door or rear gate to lock it.
. Within 3 seconds after locking the
doors and the rear gate by using the
keyless access function, it is not possible
to unlock doors and/or the rear gate by
using the keyless access function.
. When locking, be sure to carry the
access key fob to prevent locking the
access key fob in the vehicle.
! Unlocking
S02AP010201
Carry the access key fob, and grip the door
handle.
. When the driver’s door handle is
gripped, only the driver’s door will be
unlocked.
. When the front passenger’s door han-
dle is gripped, all doors (for Outback,
including the rear gate) will be unlocked.
Also, an electronic chirp will sound twice
and the hazard warning flashers will flash
twice.
! Opening rear gate (Outback)
S02AP010210
1) Rear gate opener button
Carry the access key fob, and press the
rear gate opener button. Only the rear gate
will be unlocked and opened. Also, an
electronic chirp will sound twice and the
hazard warning flashers will flash twice.
Keys and doors/Keyless access with push-button start system
2-16
Loading ...
Loading ...
Loading ...