Loading ...
Loading ...
Loading ...
(210,1)
北米Model "A2550BE-B" EDITED: 2019/ 1/ 16
understand the surrounding situation,
to drive safely, and to change the
headlight mode manually if necessary.
Type A:
. Observe the following points in
order to operate the high beam assist
function properly.
– Do not touch the camera or the
lens.
– Do not apply any strong impact to
the camera or the inside mirror.
– Do not disassemble the camera
or inside mirror.
– Do not spill liquid on the inside
mirror and camera.
– Do not place any objects over the
dashboard.
– Do not carry excessive luggage.
– Do not modify the vehicle.
– When replacing the windshield
glass, use the genuine SUBARU
parts (or equivalent products).
Type B:
. The high beam assist function uti-
lizes the stereo camera installed at the
position of the front map lights.
. For details on how to handle the
stereo camera, refer to the Owner’s
Manual supplement for the EyeSight
system.
NOTE
Observe the following points in order to
operate the high beam assist function
properly.
Type A:
. Do not attach labels or stickers to
the windshield glass near the camera.
. Do not attach any accessories near
the inside mirror and camera.
If it is necessary to attach a label,
sticker or accessory in the position
shown above, consult your SUBARU
dealer.
Type B:
For details, refer to the Owner’s Manual
supplement for the EyeSight system.
! How to use the high beam assist
function
S03AH0701
The high beam assist function will be
activated when all the following conditions
are met.
. The light control switch is in the “AUTO”
position and the low beam headlights are
on automatically.
. The turn signal lever is pushed forward.
High beam assist indicator (green)
When the high beam assist function is
activated, the high beam assist indicator
on the combination meter will illuminate.
Instruments and controls/Light control switch
3-52
Loading ...
Loading ...
Loading ...