Subaru 2019 Outback 3.6R Touring

User Manual - Page 293

For 2019 OUTBACK 3.6R TOURING.

PDF File Manual, 512 pages, Read Online | Download pdf file

2019 OUTBACK 3.6R TOURING photo
Loading ...
Loading ...
Loading ...
(301,1)
北米Model "A2550BE-B" EDITED: 2019/ 1/ 16
& Models with “keyless access
with push-button start sys-
tem”
S07AZ14
NOTE
For more details, refer to the Owners
Manual supplement for the remote
engine start system.
Access key fob
1) Lock button
An access key fob can be used as the
remote engine start transmitter. Operate
the lock button to start or stop the engine
as follows.
! Before starting the engine
S07AZ1401
Before using the remote engine start
system to start the engine, confirm the
following conditions.
. The select lever is in the “P” position.
. All doors including the rear gate are
closed.
. The engine hood is closed.
. The push-button ignition switch is in the
“OFF” position.
! When starting the engine
S07AZ1402
To start the engine with remote engine
start system, briefly press the lock button
twice within 2 seconds, then press and
hold the lock button for 3 seconds.
1. Press the lock button briefly. The
hazard warning flashers then flash once
and the keyless buzzer chirps once.
2. Within 2 seconds, press the lock button
briefly again. The hazard warning flashers
then flash once again, and the keyless
buzzer chirps once again.
3. After step 2, immediately press and
hold the lock button. The hazard warning
flashers then flash three times, and the
horn will honk once.
4. Approximately 3 seconds after step 3,
release the lock button. The engine will
then start successfully.
! When stopping the engine
S07AZ1403
Press and hold the lock button to stop the
engine with remote engine start system.
! Automatic engine shutdown
S07AZ1404
The remote engine start system will auto-
matically shut down or will not start the
engine under the following conditions.
. The total run-time has exceeded 20
minutes.
. Any door or the rear gate is opened.
. The select lever is moved to any
position other than “P”.
. The engine hood is opened.
. The push-button ignition switch is
pressed.
. The brake pedal is depressed.
. The engine speed is 3,000 rpm or more.
The time until the engine automatically
stops differs according to the setting.
To change the time until the engine
automatically stops, contact your
SUBARU dealer. However, local laws
and regulations may prohibit changing this
time.
CONTINUED
Starting and operating/Remote engine start system (dealer option)
7-15
7
Loading ...
Loading ...
Loading ...