Subaru 2019 Outback 3.6R Touring

User Manual - Page 339

For 2019 OUTBACK 3.6R TOURING.

PDF File Manual, 512 pages, Read Online | Download pdf file

2019 OUTBACK 3.6R TOURING photo
Loading ...
Loading ...
Loading ...
(347,1)
北米Model "A2550BE-B" EDITED: 2019/ 1/ 16
illuminated
. In the following cases, the Re-
verse Automatic braking system
cannot be operated.
The
(EyeSight Temporary
Stop indicator: White) is illu-
minated, and the messages
corresponding to the
EyeSight temporary stop are
displayed on the combination
meter display. For details, re-
fer to the Owners Manual
supplement for the EyeSight
system.
The Reverse Automatic Brak-
ing system OFF indicator is
illuminated
. In the following cases, the system
may not be able to properly
detect an obstacle. Promptly con-
tact a SUBARU dealer to have the
system inspected.
A sticker, paint, or a chemical
is applied to the sonar sen-
sors or the rear bumper near
the sonar sensor
The rear bumper is modified
The rear bumper has been
removed and attached
The ground clearance is chan-
ged due to the vehicle’s load-
ing condition or modification
Ice, snow or mud is adhered to
the sonar sensors or the rear
bumper near the sonar sensor
The rear bumper is exposed to
strong impact, or the rear
bumper is deformed
. On a steep hill, the system’s
automatic braking ability will be
reduced.
. The system is designed to avoid
collisions by automatic hard
braking when the vehicle’s rever-
sing speed is less than approxi-
mately 3 mph (5 km/h). However,
the system does not guarantee
that the vehicle will be able to
avoid collisions in any situation.
. If the vehicle is reversed at an
extremely slow speed, the dri-
vers operation may be priori-
tized. In this case, automatic
braking will not operate.
. The system may not be able to
detect the following objects
Sharp or thin objects such as
poles, fences and ropes which
may not reflect the sound
wave emitted from the sonar
sensor
Objects that are too close to
the rear bumper when the
select lever is set to the “R”
position
Objects with a surface which
may not reflect the sound
wave emitted from the sonar
sensor such as a chain link
fence
. Objects the system is not de-
signed to detect
Pedestrians
Moving objects including
moving vehicles
Objects which absorbs sound
waves such as cloth or snow
Objects whose surface has a
diagonal angle
Objects that are low to the
ground such as parking
blocks
Objects that are high above
the ground such as objects
hanging from above
. When reversing the vehicle, the
system may not be able to prop-
erly detect objects or may cause
a system malfunction if the fol-
lowing conditions exist
CONTINUED
Starting and operating/Reverse Automatic Braking System
7-61
7
Loading ...
Loading ...
Loading ...