Loading ...
Loading ...
Loading ...
11
7. The 5-in-1 nozzle is equipped with a Quick-Connect tip
which can be easily attached to the Quick-Connect collar
of the spray wand. To connect the nozzle, pulling the
quick-connect collar backwards, at the same time, snap
the nozzle onto the quick-connect collar until it clicks into
place, then release the quick-connect collar (Fig. 12).
mWARNING! Do not attach or remove the nozzle while
the trigger is engaged. Doing so could result in damage to the
pressure washer or injury to the user.
8. Unlock the lock latch by sliding it down, and insert the
high pressure hose into the high pressure hose connection
on the end of the trigger gun. Slide the latch back to lock
the hose in place (Figs. 13 – 14).
mWARNING! Keep hose away from sharp objects.
Bursting hoses may cause injury. Examine hoses regularly and
replace if damaged. Do not attempt to mend a damaged hose.
9. Connect the high-pressure hose to the base unit by
inserting the other end into the water outlet. While pushing
rmly in on the hose, twist the outer collar clockwise until
tight to ensure a water-tight connection (Fig. 15).
10. Put the trigger gun with spray wand assembly on the gun
holder. Your pressure washer is ready for use (Fig. 16).
Fig. 12
5-in-1 nozzle
“Click”
Quick-Connect collar
Spray wand
Lock latch
High-pressure hose
Fig. 13
Lock latch
High-pressure hose
Fig. 14
Fig. 15
High-pressure hose
Water outlet
R
Fig. 16
Loading ...
Loading ...
Loading ...