Loading ...
Loading ...
Loading ...
Other Features
Control Lock
To avoid having someone accidentally start
or stop the washer, press the control lock
button . To unlock the controls, press the
control lock button again .
Mute Sound
A chime will sound at the end of the cycle
when this option is not activated. The signal
can be turned on or off by pressing the mute
sound button. Please note that activating the
mute sound option will not mute all sounds
emitted by the console. This option only
silences the end of cycle tone.
Delay Start
Press delay to select a wash time convenient
to your schedule or during off peak energy
hours. The delay time selected will be
displayed and begin counting down when you
select start. A cycle can be delayed up to a
max of 6 hours.
Status Display/Timer
The estimated total cycle time will be
displayed when the cycle is selected. The
time may increase if water pressure is low,
oversudsing occurs or the load becomes
unbalanced. The estimated remaining cycle
time is displayed throughout the cycle.
Add a Garment
The text ADD A GARMENT will be illuminated
through the water filling phase of a wash cycle.
While ADD A GARMENT is lit, the cycle can
be paused, and once the door is unlocked,
any additional garments can be added to the
load. When ADD A GARMENT is no longer
Controls and Settings
illuminated, no additional garments should be
added to the wash load.
NOTE
If the temperature and water level are too
high, the door will remain locked.
1
2
Eco Indicator
The eco symbol will light up on the
LED display to indicate that the selected
combination of temperature, spin speed and
options is eco friendly.
Pump Cleanout/Manual Drain
In the event the washer will not drain under its
own power due to a power outage or clogged
drain pump you can drain the water left in the
tub manually. See the “Pump Filter Cleaning”
in “Care and Cleaning” section.
Door Lock Indication
While the cycle is in progress, the LED above
the start/pause button will be continuously
lit, indicating that the door is locked. When
the LED is lit continuously, do not force open
the door. Wait until the LED above the start/
pause button is blinking before attempting to
open the door.
1. Cycle Countdown 2. Delay Start Timer
15
Loading ...
Loading ...
Loading ...