Loading ...
Loading ...
Loading ...
Controls and Settings
Cycle Options
To add options, press the desired option
button and an indicator light will illuminate. To
delete options, press the option button again
and the indicator light will turn off.
To protect your fabrics, not all options are
available with every cycle. If an option is not
appropriate for the cycle, the indicator will not
light. Occasionally, a setting and option in the
same cycle will conflict with each other. When
this happens, incompatible selections will be
excluded.
fresh rinse
Use this option when additional rinsing is
desired to remove excess dirt and detergent.
NOTE
To change the options once the cycle has begun (after the start button has been pressed),
either rotate the knob to the reset position (12 o’clock position) OR press the power button
to turn off the unit and cancel the cycle. Press the power button again to turn on the unit and
select the new cycle and/or settings, and press start to begin. Cycle settings CANNOT be
changed without canceling the current cycle.
It is recommended for heavily soiled loads or if
household members have sensitive skin.
prewash
Select this option to add a short initial wash
period to a cycle. Heavily soiled and stained
loads will prewash for approximately 15-20
minutes. The water will drain and the load will
automatically advance to the regular wash
cycle.
wrinkle release
After the final spin, the washer will perform a
“dry” agitation to loosen the garments from
the side of the drum.
14
Loading ...
Loading ...
Loading ...