Loading ...
Loading ...
Loading ...
Cycle Selection
Press the power button
to turn on the unit.
Turn the cycle selector to the desired cycle.
The estimated cycle time, as well as the
default settings for water temperatures, spin
speed, and soil level for each cycle will be
indicated for the cycle selected. In most cases
cycle settings and options can be changed.
See “Cycle Settings”, “Cycle Options”, and
“Settings Chart” for more details.
NSF Protocol P172
Sanitization Performance of Residential
and Commercial, Family-Sized Clothes
Washers
Controls and Settings
Not all cycles, options, or features listed are available on every model. Console shown
above for reference only. Your model may differ.
NOTE
Only sanitizing cycles have been designed to
meet the requirements of NSF P172 protocol
for sanitization efficacy.
whitest whites
Use for white fabrics and lightly colored
clothing. Refer to fabric care label for use
of liquid chlorine bleach. Hot water is
recommended to ensure optimal bleach
activation. For peak rinsing performance and
to avoid chlorine residues on your laundry add
fresh rinse to this cycle.
NOTE
To change the cycle and/or settings once
the cycle has begun (after the start button
has been pressed), either rotate the knob
to the reset position (12 o’clock position)
OR press the power button to turn off the
unit and cancel the cycle. Press the power
button again to turn on the unit and select
the new cycle and/or settings, and press
start to begin. Changing a cycle selection
without canceling the current cycle WILL
NOT change the cycle.
NOTE
If the cycle selector indicator is pointed at
the 12 o’clock position, then “--” will be
displayed. Turning the cycle selector to any
other position will result in the default cycle
settings for the indicated wash program
being illuminated.
heavy duty
Use this cycle for heavily soiled, durable
garments - ex. towels, sports gear, or fabric tote
bags. For best soil and stain removal, use the
hottest water safe for the fabrics being washed.
sanitize
Select to clean and sanitize heavily soiled,
colorfast fabrics including towels, bedding,
and children’s clothing.
The sanitize cycle will kill 99.9% of bacteria
with no carryover of bacteria between loads.
No bleach or harsh chemicals are needed,
but higher temperatures are required. Please
check fabric care labels to prevent damage.
NOTE
If the voltage at your outlet is under 110 V
the internal heater may not adequately heat
the wash water. If the cycle is interrupted
while the water is heating, the final
temperature of the wash water may be lower
and sanitization may be reduced.
The wash water is heated by an internal boost
heater as the load tumbles. Cold water is added
to cool down the load prior to drain and spin.
jeans
Select this cycle for washing an entire load
of lightly to normally soiled denim jeans or
similarly-colored cotton khakis.
Cycle Options / Cycle Status Display
Cycle Selection
11
Loading ...
Loading ...
Loading ...