Loading ...
Loading ...
Loading ...
98
Chapter 6
Congure the Router in Repeater Mode
• Wireless Name of Root AP - The SSID of AP that you want to connect to.
• MAC Address of Root AP - The MAC address of AP that you want to connect to.
• Mode - Select the desired mode. It is strongly recommended that you keep the
default setting 11bgn mixed, so that all 802.11b/g/n wireless devices can connect to
the router.
Note:
If 11bg mixed mode is selected, the Channel Width field will turn grey and the value will become 20M, and cannot be
changed.
• Channel Width - Select any channel width from the drop-down list. The default setting
is Auto, which can automatically adjust the channel width for your clients.
• WDS Mode -This field determines which WDS Mode will be used. It is not necessary
to change the WDS mode unless you notice network communication problems
with root AP. If you select Auto, then router will choose the appropriate WDS mode
automatically.
• Enable Wireless Router Radio - The wireless radio of the router can be enabled or
disabled to allow or deny wireless access. If enabled, the wireless clients will be able
to access the router.
• Survey - Click this button, and the AP List page will appear. Find the SSID of the Access
Point you want to connect to, and click Connect in the corresponding row. The target
network’s SSID and MAC address will be automatically filled into the corresponding
box.
6. 4. 2. Wireless Security
1. Visit http://tplinkwifi.net, and log in with the username and password you set for the router.
2. Go to Wireless > Wireless Security.
3. Configure the security settings of your wireless network and click Save.
Loading ...
Loading ...
Loading ...