Loading ...
Loading ...
Loading ...
©
2020 DJI All Rights Reserved.
11
DJI Smart Controller User Manual
位置T
位置S
位置P
Position Flight Mode
T T-mode (Tripod)
P P-mode (Positioning)
S S-mode (Sport)
T-mode (Tripod): The aircraft utilizes GPS and vision systems to locate itself, stabilize, and navigate
between obstacles. In this mode, the maximum ight speed is limited to 2.2 mph (3.6 kph). The
responsiveness to stick movements is also reduced for smoother, more controlled movement.
P-mode (Positioning): P-mode works best when the GPS signal is strong. The aircraft utilizes GPS,
Vision Systems, and an Infrared Sensing System to stabilize, avoid obstacles, and track moving
subjects. Advanced features such as TapFly and ActiveTrack are available in this mode.
S-mode (Sport): The handling gain values of the aircraft are adjusted to enhance aircraft
maneuverability. Note that Vision Systems are disabled in this mode.
Regardless of the position the switch is in on the remote controller, the aircraft begins in P-mode by
default. To switch ight modes, rst go to camera view in DJI GO 4 /DJI Pilot / DJI Fly, tap
and
enable “Multiple Flight Modes”. After enabling multiple ight modes, toggle the switch to P and then
to S or T to switch ight modes.
Refer to the ight modes section in the aircraft’s user manual for more information about
ight mode features for different aircraft types.
RTH Button
Press and hold the RTH button to start Return to Home (RTH) and the aircraft will return to the last
recorded Home Point. Press the button again to cancel RTH and regain control of the aircraft. Refer
to the Return to Home section in the aircraft’s user manual for more information about RTH.
Position T
Position P
Position S
Loading ...
Loading ...
Loading ...