Loading ...
Loading ...
Loading ...
MAP UPDATE (8-inch with Navi system only)
If a problem occurs when attempting to perform a map update, refer to the following table.
XErrors when updating via Wi-Fi, smartphone
Error code Cause Solution
101
The update package received is not valid for this
device.
Update the map data using a USB memory device. (→P.206)
Then, perform the following procedure:
Turn the ignition switch to the “LOCK”/“OFF” position → Open the
driver’s side door → Close the door → Wait for 3 minutes or more →
Start the engine.
If the update cannot be completed successfully, contact your
SUBARU dealer.
103 There is not enough space for the update package
Perform a factory reset to free up space (→P.67) and perform the
update again. (→P.205)
Then, perform the following procedure:
Turn the ignition switch to the “LOCK”/“OFF” position → Open the
driver’s side door → Close the door → Wait for 3 minutes or more →
Start the engine.
If the update cannot be completed successfully, contact your
SUBARU dealer.
CAUTION:
When a factory reset is performed, various settings (driver
prole, paired Bluetooth devices, radio presets, audio settings,
etc.) will be reset.
104
The update package is older than the current
package on the device.
The system map data is the latest version. Update is not necessary.
WHAT TO DO IF
245
Appendix/What To Do If/Index
9
HL8_US.indb 245 2021/04/20 9:21:23
Loading ...
Loading ...
Loading ...