Loading ...
Loading ...
Loading ...
Symptom Cause Solution
Installation does not complete (system
restarts continuously).
-
Wait until the home screen is displayed.
•
Depending on the software version you
are updating from, updating may be
performed in multiple steps and the system
may restart multiple times.
This is not a
malfunction.
“Software update install failed” is displayed. The system software has been corrupted.
Have the software updated by your SUBARU
dealer immediately.
In this case, none of the system functions,
other than the rear camera, will operate.
When using the rear camera, only the
camera image will be displayed, guide lines,
etc. will not be displayed.
If this message is displayed, the system will
restart every 180 seconds. In this situation,
turn the ignition switch to the “LOCK”/“OFF”
position, open and close the driver’s side
door and check that the system is o. If
any door is open when the ignition switch
is turned to the “LOCK”/“OFF” position, the
system may not turn o.
WHAT TO DO IF
244
HL8_US.indb 244 2021/04/20 9:21:23
Loading ...
Loading ...
Loading ...