Loading ...
Loading ...
Loading ...
11
SYSTEM SETUP
English Deutsch FrançaisDansk Español Italiano SvenskaNederlandsDansk Italiano SvenskaDeutsch NederlandsEnglish FrançaisEspañol
Connecting to AC power
1. Make sure the power switch is off.
2. Plug one end of the AC power cord into the AC Mains connector on
the power stand.
3. Plug the other end into a live AC (mains) receptacle (Figure 4).
Figure 4
Power connections
AC Mains
CAUTION: DO NOT block or cover
the handle opening, which is part of
the ventilation system. Doing so can
cause the L1
®
model II system to
overheat, switch to a thermal protec-
tion mode, and temporarily turn off.
Power switch
CAUTION: Bose recommends using a quality surge suppressor on all electronic equipment.
Voltage variations and spikes can damage electronic components in any
system. A quality
suppressor, which can eliminate the vast majority of failures attributed to surges, may be pur-
chased at electronics stores.
VeniceOG.book Page 11 Friday, August 31, 2012 12:18 PM
Loading ...
Loading ...
Loading ...