Dji CP.RN.00000040.01 User Manual

Loading ...

RONIN-SC

User Manual

Gimbal Follow Mode

Pan and Tilt Follow: Pan and tilt axes follow the movement of the grip.

Pan Follow: Only pan axis follows the movement of the grip.

FPV: Pan, tilt and roll axes follow the movement of the grip. Speed must be set to Medium, High or

Customized. FPV mode is not available when the speed is set to Low. When the speed is set to customized,

the pan speed value must be set to 50 or higher. Note that Deadband is unavailable in FPV mode.

Custom: Tap the blue arrows of the gure to manually set which axis will follow the movement of the grip.

3D Roll 360: Allows the camera to rotate 360° at any attitude.

Speed: Determines how fast the camera travels while translating a pan, tilt, or roll movement.

Deadband: The deadband determines how much movement the gimbal tolerates prior to translating the

pan, tilt, and roll movement of the camera.

Push: After enabling Push, the gimbal axis can be manually pushed to the desired position.

Control Settings

Channels

The channel indicator provides feedback when conguring remote operation. Pan, tilt, and roll channels

can be reassigned and each axis can also be inverted. Normal means the direction of movement is the

same as the joystick. Inverted means the direction of movement is the opposite of the joystick.

When using the joystick, you can only control CH1 and CH3, which is mapped to tilt and pan axes by

default. You can customize channel mapping by tapping on the name of the axis on the right of the screen.

Motion

You can set the joystick control by adjusting deadband, max speed, smoothing, and endpoints for each

axis. There are three default proles for each settings.

Deadband: When the deadband value increases, more stick movement will be required to translate into the

actual movement of the gimbal.

Max Speed: Allows the remote-controlled rotational speed to be adjusted.

Smoothing: Allows you to control the sensitivity of the gimbal. The lower the smoothing value, the more

sensitive the movement of the gimbal.

Loading ...

Dji CP.RN.00000040.01 Ronin-SC - Camera Stabilizer, 3-Axis Handheld Gimbal for DSLR and Mirrorless Cameras, Up to 4.4lbs Payload, Sony, Panasonic Lumix, Nikon, Canon, Lightweight Design, Cinematic Filming,