Loading ...
Loading ...
Loading ...
RONIN-SC
User Manual
22
© 2019 DJI OSMO All Rights Reserved.
Motor Parameters
Auto Tune: The stiffness value is determined by the payload of the gimbal. Use Auto Tune to obtain the
stiffness value automatically after balancing.
Tap Auto Tune and Ronin-SC automatically calculates the result based on the weight of the gimbal setup.
Alternatively, press and hold the M button and trigger simultaneously for four seconds to start Auto Tune
without using the app.
The Auto Tune process takes approximately 15 to 30 seconds. After Auto Tune, you can see detailed motor
diagnostics at the bottom of the screen. If the gimbal is properly balanced, the power value of the motors
should be in the range of ±5. If power consumption on a particular axis constantly goes beyond that range,
check the mechanical balance of Ronin-SC.
Stiffness: The motor stiffness adjustment allows you to ne-tune the power that is applied by the motors as
they react and balance the weight on each axis. Make sure you leave an extra margin to ensure stability
at all times. If the stiffness value is too high the gimbal may shake and if the value is too low the gimbal
performance will be affected.
When using Auto Tune, make sure the three axes are unlocked, and that Ronin-SC is placed on a
steady surface in Upright mode.
Make sure the gimbal is balanced and the stiffness values are tuned properly every time you
change the camera or lens.
User Prole
Three user proles can be set and save.
Loading ...
Loading ...
Loading ...