Loading ...
Loading ...
Loading ...
RONIN-SC
User Manual
20
© 2019 DJI OSMO All Rights Reserved.
The interval time between shooting photos should be set to one second more than the shutter time to avoid
blurred footage when using a long exposure.
After confirming the camera settings, the panorama range can be set by dragging the white dots on
the grid map, pushing the gimbal manually, or using the virtual joystick. The total range covered by the
endpoints and the shots required to compose the panorama is displayed above the grid map. The slanted
roll motor design allows users to view the path of the panorama through the built-in display of the camera
with little obstruction. The tilt axis range in Panorama mode is -45° to +90° to avoid capturing the gimbal in
the shot while the pan axis allows you to capture a full 360° rotation.
Tap the shutter button to start capturing the sequence.
Timelapse
In Timelapse mode, Ronin-SC triggers the camera to capture still images with your desired interval time
and will automatically stop when completed. The duration for the Timelapse and the frame rate can be set
so that Ronin-SC can calculate the exact number of images required.
By enabling Push mode, users can manually adjust the pan and tilt axes before launching the Timelapse.
Users can push Ronin-SC to alter the camera orientation and adjust the framing. Tap the Virtual Joystick
icon to use the virtual joystick to adjust the camera orientation.
Motionlapse allows you to set up to ve waypoints so that the camera moves during the Timelapse.
To adjust the position of a waypoint, adjust the camera to the desired position, and tap the + icon to
conrm the waypoint. You can also use the virtual joystick to control the pan, tilt, and roll axis as well.
To add another waypoint, tap the highlighted waypoint to deselect it and tap the + icon above the grid
map. Afterwards, move the gimbal to the next waypoint. To delete a waypoint, select the waypoint and tap
the trash icon.
After setting up the waypoints, you can either tap Preview to make sure the Motionlapse includes
everything or tap the shoot button to start shooting. Make sure the camera and gimbal have been
connected using a corresponding camera control cable.
Loading ...
Loading ...
Loading ...