Loading ...
Loading ...
Loading ...
RONIN-SC
User Manual
© 2019 DJI OSMO All Rights Reserved.
11
2. Balancing the Vertical Tilt
a. Rotate the tilt axis so that the camera lens is pointing upward. If a phone holder and mobile phone are
mounted, rotate the tilt axis so that the camera lens is tilting up at about 45°. Make sure the camera is
not top or bottom-heavy. If the camera is tilted to one side, pull the tilt arm towards the other side.
b. Loosen the knob on the tilt motor
and adjust the balance of the camera until the camera is steady
without tilting up or down.
c. Tighten the tilt axis knob.
d. Repeat Step 1 to balance the depth of the tilt axis. The slider on the dovetail plate is used to record the
balance position. Move the slider next to the mounting plate and tighten the slider.
2
1
45°C
1
2
3. Balancing the Roll Axis
a. Lock the tilt axis and unlock the roll axis. Check the direction in which the roll motor swings. If the
camera rotates to the left, move the camera to the right. If the camera rotates to the right, move the
camera to the left.
b. Loosen the knob on the camera mounting plate
, and adjust position of the plate until the camera is
steady.
c. Tighten the roll axis knob. If the camera moves forward, move the camera back until the slider is next to
the mounting plate.
1
2
1
2
OR
OR
Loading ...
Loading ...
Loading ...