Loading ...
Loading ...
Loading ...
Frequently Asked Questions
73
Problem Possible cause and solution
Neither milk nor milk
froth comes out of the
main dispenser.
The milk pipework was connected incorrectly to the
main dispenser.
The seam on the milk pipework, main dispenser, and
on the rinse valve makes it easier to assemble.
Check whether the milk pipework is correctly
connected to the main dispenser.
The milk pipework is blocked.
Clean the main dispenser and milk pipework
carefully with the brush.
Empty the drip tray and the
waste container appears
in the display, even
though the drip tray has
been emptied.
This is not a fault. The drip tray was not properly
removed and/or replaced too quickly.
Insert the drip tray and the
waste container appears
in the display even
though both are in-
stalled.
The drip tray is not correctly installed and is therefore
not detected.
Empty the drip tray and grounds container.
Reassemble all parts and push the drip tray back
as far as it will go in the coffee machine.
Loading ...
Loading ...
Loading ...