Loading ...
Loading ...
Loading ...
Chevrolet VOLT Owner Manual (GMNA-Localizing-U.S./Canada/Mexico-
12163007) - 2019 - crc - 6/11/18
Vehicle Care 263
9. Reinstall the taillamp housing
by aligning the two pins (1) on
the back of the housing with
the rubber anchors in the
vehicle body. Be sure to align
the slot (2) on the housing with
the corresponding post on the
vehicle body, and the plastic
tab (3) with the plastic slot on
the vehicle body.
10. Push until the housing fits
securely in place and is
fastened at all four locations.
11. Reinstall the two Torx
®
screws
and the other screw.
License Plate Lamp
To replace one of these bulbs:
1. Press the spring clip on the
right end of the lamp assembly
to the left to unlock the lamp
assembly.
2. Pull down on the lamp
assembly to remove it from the
fascia.
3. Turn the bulb socket (1)
counterclockwise to remove it
from the lamp assembly (3).
4. Pull the bulb (2) straight out of
the bulb socket (1).
5. Push the replacement bulb
straight into the bulb socket (1)
and turn the bulb socket (1)
clockwise to install it into the
lamp assembly (3).
6. Reinstall the lamp assembly (3)
into the fascia by inserting the
left side first.
7. Push the spring clip side into
place.
Loading ...
Loading ...
Loading ...